バートラム570のRefit工事。船内ではサーフェーサーが入りました。角のRも綺麗に出ています。

The picture is Bertram 570 refit project. Construction process is at the surface paint on the boat. It’s clear to see specified corner radius.

工場ではハッチの積層・物入の型作成中。

水が溜まらない様にハッチには勾配をつけました。物入の底の部分にも勾配を付ける一手間を加える。

In the factory, hatch lamination just starts and storage mold is making.

The hatch top gets angle 1.5°to the stern for water running. The storage bottom also gets slope for smooth water flow.

ハッチは単板構造ではなく、重量バランスをケアしながらコア材を使用。

長さ約1380あるので、補強を入れました。

The hatch is sandwich construction to estimate the weight balance.

This hatch length is 1380mm, so better put the support in it.