カテゴリー : Design

Mold

Modeling for the FRP mold.

Need to think the procedure and less mold parts for cost efficiency.

モールド用の3Dモデリング。

型点数やジョイント、それぞれに考え方があります。

General Arrangement

General Arrangement is important to set up the accommodation, design direction and color scheme etc based upon the structure.

GA is revised many times to put many ideas.

一般配置図は構造に基づいて、レイアウトやデザイン、そしてカラー&マテリアルスキームの方向性を定めるのに大事な図面です。

この図面に色々なアイデアを詰め込んでは消すという事を短期間に何回か繰り返します。

Wall Paper

It’s first time to put the wall paper on the boat.

I think because this custom boat is totally match with the wall paper design except leather panel or wood.

We select 4 different wall paper for certain area.

ボートで壁紙(クロス)の施工をしたのは初めてです。

この「カスタムボート」はレザーパネルや木パネルではなく、クロスが一番フィットし、合うクロスを選定。

全部で4種類のクロスを各エリアに使い、トータルでバランスを整えます。

Fabric

The fabric is important for the interior design of boat.

There are so many choices of fabric, so it shows the concept of the boat somehow.

We have to be carful that the line is still available or not, because many lines are discontinued even to find the perfectly match the one.

ファブリックはボートインテリアデザインにおいて、重要な役割です。

色々なファブリックがありますが、その中から何を選ぶかをトータルのデザインと照らし合わせて選択していくのでセンスがでます。

注意しなければいけないのが、気に入ったファブリックに限って生産停止(ファブリックでは良くあります・・)があるので、生産ラインの確認です。

ISO

The boat building rule is quite complex because it’s related to many things.

Once you get it, and update following rules, it understands all categories. But it needs to keep studying.

Checking ISO rules and other class rule to match with boat category.

ボート建造において「規則(ルール)」に準ずるのは当然ですが、色々な事が絡み合っているので中々複雑です。

まずは分厚いルールを読み解き、アップデートしていき、該当する箇所を詳細に検討、プランを立てていきます。常に勉強が必要です(何事もそうですが)。

ISOルールも複雑ですが、カテゴリーに属した箇所をしらみつぶしに見ていきます。

TOP