カテゴリー : Motor Yacht / Boat

Engine Room Structure

DSC02415

DSC02416

DSC02417

It’s only and the best time to check the engine room structure because all equipment is out.

Re-check the engine bed, frames and stringers and modify the drawing.

Follow up the construction stage and be prepared and keep modifying the drawing.

機関場の主な艤装品が取り外された今こそ、出来る事をやっておきます。

まずはエンジンベットやフレーム・ストリンガー等の既存の骨を再チェック。

現場の進行具合に合わせ、準備をし修正を繰り返していきます。

Stainless for Galley

DSC00226

DSC00244

Stainless steel is very good choice for Galley, but it may be boring and restaurant kitchen look.

The combination of wood and change the stainless finish are good idea to look very clean and modern.

ボートのギャレー(キッチン)のデザインで、ステンレスを多用すると一歩間違えると味気ないものになってしまいます。

ですが木との組み合わせ、そしてステンの仕上げを変える事で上手くカラースキームを整えます。

Wooden Cap

DSC01927

DSC01928

Wood surface either exterior or interior has been used many screws to tighten things up.

But as the designer of concern and view, we don’t want to show screw end on any surface.

For the exterior of boat, use typically Teak wood and collect spare of wooden cap.

We try to match the lines up to look like there is no wooden cap there.

船では様々なものを固定する為にビスやボルトでとめます。

デザイナーとしては、このビス頭を出来るだけ見せたくはないです。

ボートではチーク材を良く使いますが、この様な木栓をスペアとして取っておきます。

出来るだけ木目にあった木栓をし、見せる必要のないもののケアをします。細かい事ですが・・

Curved Surface

DSC07394

DSC07398

There is a lot of curve shape on boat.

It takes certain wood skill, technique and time to build it.

Curved surface turns more elegance based upon the safety.

ボートでは曲面が多いです。

カーブの面を作り出すには「スキル」「テクニック」そして「手間」が懸ります。

安全面に配慮された曲面はよりエレガントな設えになりますね。

Engine Room Layout

DSC02325

Rearrange the engine room major items, such as engine, generator and aircon compressor.

Check the site for engine bed, longi and frame and pick all the existing items.

Before install the equipment, it needs to evaluate from the drawing with owner.

エンジンルームのアレンジメントで様々な機器をチェックします。

まずはエンジンベット、ロンジ、フレームを計測し、それぞれの艤装品の品番をチェックしていきます。

換装、設置前に図面でオーナーと施工も含めて検討します。

TOP